P1096702-001 • ZQ320 Repair Procedures • 2-22 •
Removing the Motor Assembly
1. Remove the Printer Frame from the
Lower Housing as described on Page
2-17 to 2-18.
2. Remove the Gear Plate Assembly
as described on Pages 2-19.and 2-20.
3. Use a T6 TORX driver to remove
the two (2) screws that secure the
Motor to the Printer Frame.
4. Remove the Motor by pulling it out of
the Printer Frame (as shown).
5. Reverse the procedure to install the
Motor Assembly.
To Next Page
Loading...