Pg 4: Feeding Into Flipper? – No
Pg 5: Feeding Into Flipper?- Yes
Pg 6: Service Center Instructions
Pg 7: Reference Page Part 1
Pg 8: Reference Page Part 2
Reference Page Part 2
Obsolete, replaced by black singulation roller
2.7 Correct order for Feeder Motor wires2.6 Correct order for SEN FLCD J11
2.0 Card Feed Sensor on Flipper Deck
2.1 Card Feeding Behind
Flipper Deck
Worn Singulation Roller
2.2 Old and Worn Singulation Roller Respectively
2.3 Black Singulation Roller 2.4 Top Feed Roller
2.5 Worn Bottom Feed Roller
8
To Next Page
Loading...
