EasyManua.ls Logo

Zebra ZXP 7 series - Installation and Setup; General Information

Zebra ZXP 7 series
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Page Part 1
Pusher Plate Released
Feeding Cassette Closed and
Pusher Plate Released
Cards On Correct Side Of Pusher Plate
Cards on wrong side of pusher plate
Pg 4: Feeding Into Flipper? No
Pg 5: Feeding Into Flipper?- Yes
Pg 6: Service Center Instructions
Pg 7: Reference Page Part 1
Pg 8: Reference Page Part 2
1.0 Cards Uneven in Feeding Cartridge
1.1 Loading the Feeding Cassette
1.2 Cards on wrong side of pusher plate
1.3 Pusher plate properly released 1.4 Worn Singulation Roller
Cleaning Cassette Location
2
Cleaning Cassette and
Cleaning Rollers With Tape
Still On
Cleaning Cassette Being
Inserted Into Proper Location
1.5 Cleaning Cassette location and Proper installation
Cleaning Cassette Location
Press the Feeding Cassette Down
Slide the Cassette All the Way to the Left
Until The Cassette Locks Into Place
7

Other manuals for Zebra ZXP 7 series

Related product manuals