Zebra ZXP 7 series - Page 12

10
7026
Flipper Card Jam
What Was The Printer Doing
When The Problem
Occurred?
Feeding?
Pg.11
Is the Flipper Roller Popped
Out Of Place On the Flipper
Deck
(See Pic 1.0)?
No
Refer to the Service Manual
to Replace Flipper Roller
Yes
Printing?
Pg. 13
Initializing
Is There A Card In
The Flipper Deck?
Is There A Card
Jammed In The
Reject Bin Blocking
The Flipper?
Is There A Card In
The Card Path
Blocking The Flipper?
(See Pic 1.1)
Is There A Card
Jammed Under The
MAG Head Blocking
The Flipper?
No
No
No
No
Yes
Done
Card
Prints
Send Printer For
Service Pg. 14
Turn Printer Off,
Remove Card,
Restart Printer.
Yes
Turn Printer Off,
Remove Card,
Restart Printer.
Card
Prints
Done
Done
Turn Printer Off,
Remove Card,
Restart Printer.
Yes
Card
Prints
Card Still
Jams
Card Still
Jams
Card Still
Jams
Turn Printer Off,
Remove Card,
Restart Printer.
DoneYes
Card
Prints
Card Still
Jams
Pg. 10 Flipper Jam When Initializing
Pg.11 Flipper Jam When Feeding Part 1
Pg. 12 Flipper Jam When Feeding Part 2
Pg.13 Flipper Jam When Printing
Pg.14 Service Center Instructions
Pg. 15 Reference Page Part 1
Pg. 16 Reference Page Part 2