Zebra ZXP 7 series - Page 15

13
From Print
Module
From Options
Module
Where Is The
Card Coming
From?
Is the Card
Stalled/ Jammed
Btwn the Print
Module and
Flipper?
Is the Card
Stalled/ Jammed
Btwn the Options
Module and the
Flipper?
Is the Platen Roller
on the Flipper Deck
Worn?
Is the Platen Roller
on the Flipper Deck
Turning?
Is the Flipper Roller
on the Flipper Deck
worn?
Is The Flipper Deck
Level w/ The Card
Path?
Is The Flipper Deck
Level w/ The Card
Path?
No No
No
No
Yes
No
Turn Off Printer. Remove
Card From Flipper.
Restart Printer.
Yes Yes
Turn Off Printer, Open Options
Door, Remove Cleaning Cartridge
and Remove Jammed Card.
Restart Printer and Print card
again.
Yes Yes
Yes
No
Yes
Card
Prints
Card
Jams
7026
Flipper Card Jam
What Was The Printer
Doing When The
Problem Occurred?
Is the Flipper Roller
Popped Out Of Place On
the Flipper Deck?
No
Refer to the Service
Manual to Replace
Flipper Roller
Yes
Initializing?
Pg. 10
Printing
Feeding?
Pg. 11
Done
Card
Prints
Card
Jams
Send Printer For
Service Pg. 14
No
Send Printer For
Service Pg. 14
Send Printer For
Service Pg. 14
Send Printer For
Service Pg. 14
Done
Card
Jams
Send Printer For
Service Pg. 14
Pg. 10 Flipper Jam When Initializing
Pg.11 Flipper Jam When Feeding Part 1
Pg. 12 Flipper Jam When Feeding Part 2
Pg.13 Flipper Jam When Printing
Pg.14 Service Center Instructions
Pg. 15 Reference Page Part 1
Pg. 16 Reference Page Part 2