Zebra ZXP 7 series - Loading Cards

12
Continued From
Pg. 11
Manual Feed Slot
Is the Platen
Roller on the
Flipper Deck
Worn?
Is the Platen Roller on
the Flipper Deck
Turning? (Remove
Flipper Roller and check
to see if platen is turning)
No
Send Printer For
Service Pg. 14
Yes
Send Printer For
Service Pg. 14
No
Is the Flipper Roller on
the Flipper Deck Worn?
Yes
Send Printer For
Service Pg. 14
Yes
Send Printer For
Service Pg. 14
No
Continued From
Pg. 11
Card Feeder
Is the Platen
Roller on the
Flipper Deck
Worn?
Is the Platen Roller on
the Flipper Deck
Turning? (Remove
Flipper Roller and check
to see if platen is turning)
Is the Flipper
Roller on the
Flipper Deck
Worn?
No
Yes
Open options Door
and clear cards.
Power cycle printer
and feed cards
again
No
Done
Cards Feed
Send Printer For
Service Pg. 14
Still
Jams
Yes
No
Yes
Pg. 10 Flipper Jam When Initializing
Pg.11 Flipper Jam When Feeding Part 1
Pg. 12 Flipper Jam When Feeding Part 2
Pg.13 Flipper Jam When Printing
Pg.14 Service Center Instructions
Pg. 15 Reference Page Part 1
Pg. 16 Reference Page Part 2