Zebra ZXP 7 series - Page 110

106 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
5: ZXP Series Toolbox
Cleaning
Cleaning
Clean Printer
The Clean Printer screen gives you the option to clean the printer via the Toolbox; refer to
Section 6, for cleaning via the OCP.
• Card Path: The Card Path cleaning interval can be adjusted depending on the printer
operation environment. The default cleaning interval is every 5,000 cards. A running
card count is displayed indicating the number of cards printed since last cleaning. Click
on the Clean button so start the cleaning process. For details, see Clean the Card Path on
page 119.
• Feeder Path: The Feeder Path cleaning interval can be adjusted depending on the
printer operation environment. The default cleaning interval is every 5,000 cards. A
running card count is displayed indicating the number of cards printed since last cleaning.
Click on the Clean button so start the cleaning process. For details, see Clean the Feeder
Path on page 120.
The Restore Defaults button resets the cleaning interval settings to the factory defaults.
The Save button saves any changes you have made to this screen.
The Advanced Clean... button provides access to printhead polishing function. Use is
password protected and limited to Zebra-authorized service personnel.