5: ZXP Series Toolbox
Cleaning
P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 107
Clean Laminator
The Clean Laminator screen gives you the option to clean the laminator via the Toolbox; refer
to Section 6, for cleaning via the OCP.
• Laminator Card Path cleaning interval can be adjusted depending on the printer
operation environment. The default cleaning interval is every 5,000 cards. A running card
count is displayed indicating the number of cards printed since last cleaning. Click on the
Clean button so start the cleaning process. For details, see Clean the Laminator Card Path
on page 123.
• Laminator Roller cleaning interval can be adjusted depending on the printer operation
environment. The default cleaning interval is every 5,000 cards. A running card count is
displayed indicating the number of cards printed since last cleaning. Click on the
Clean button so start the cleaning process. For details, see Clean the Laminator Media
Rollers on page 124.
• Laminator Oven (Heater Rollers) cleaning interval can be adjusted depending on the
printer operation environment. The default cleaning interval is every 20,000 cards. A
running card count is displayed indicating the number of cards printed since last cleaning.
Click on the Clean button so start the cleaning process. For details, see Clean the
Laminator Oven (Heater Rollers) on page 126.
The Restore Defaults button resets the cleaning interval settings to the factory defaults.
The Save button saves any changes you have made to this screen.
To Next Page
Loading...
