108 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
5: ZXP Series Toolbox
Print Test Card
Print Test Card
•The Print Sample Card button prints the default sample card or a sample card of
your choice.
1. View the Test Card Library. Use the scrollbar to view all the selections.
2. Set the front side:
a. Select (click on) a card from the Test Card Library.
b. Click the Set As Front button.
c. View the selected card in the Preview. Note that to remove the selected card from
the Preview, click the Set As Front button.
d. To change the selection, repeat Step a through Step c.
3. Set the back side: Same as Step 2, except click the Set As Back button.
4. When satisfied with your selection, click on the Print Sample Card button (circled
above) to print the sample card.
•The Print Configuration Test Card button provides printer configuration data on a card.
•The Reprint Last Card button sends a command to the printer to print the last card.
To Next Page
Loading...
