Zebra ZXP 7 series - Page 123

6: Cleaning
Cleaning the Printer
P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 119
Clean the Card Path
Step 1. From the Clean Printer Menu, select CLEAN CARD PATH.
Step 2. Use the Printer Cleaning Card, and follow the OCP instructions.
Step 3. Open print cover, open ribbon drawer, remove ribbon, and then press Next.
Step 4. Close ribbon drawer, close print cover, and then press Next.
Step 5. Insert long cleaning card in Manual Feed Slot, and then press Clean.
Step 6. Wait while cleaning process completes. The card will eject through same slot.
Step 7. Flip the cleaning card, reinsert it in the Manual Feed Slot, and then press Clean.
Step 8. Wait while cleaning process completes. The card will eject through same slot.
Step 9. Replace the ribbon, and press Next.
Step 10. The OCP will return to the Clean Printer Menu.
NOTE • Do not use previously used cleaning cards.