Zebra ZXP 7 series

To Next Page

To Previous Page

120 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001

6: Cleaning

Cleaning the Printer

Clean the Feeder Path

Step 1. From the Clean Printer Menu, select CLEAN FEEDER.

Step 2. Use the Feeder Cleaning Card, and follow the OCP instructions.

Step 3. Remove all cards from feeder cartridge, and then press Next.

Step 4. Insert short cleaning card in top slot, then press Clean.

Step 5. Press yellow button in feeder cartridge to release pusher plate, and then press Next.

Step 6. Wait while cleaning process completes. The card will eject through same slot.

Step 7. Flip the cleaning card, reinsert it in top slot, and then press Clean.

Step 8. Wait while cleaning process completes. The card will eject through same slot.

Step 9. The OCP will return to the Clean Printer Menu.

Step 10. Load the cards back into the feeder cartridge.

NOTE • Do not use previously used cleaning cards.

Zebra ZXP 7 series - Page 124