80 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
4: Printer Settings and Adjustments
Printing Preferences
To extract black areas from color images, several selections can be made.
• Select black panel extraction type:
- Disable black extraction does not use the K panel for any part of the image. This
selection will have the effect of rendering all black images as YMC composite.
- Print YMC composite and K black uses both the K panel and the Y, M, and C
panels to print the portions of the image that are identified as black. This selection will
result in a dark, black image; but the edges will be smooth (due to the continuous tone
nature of the YMC dyes), not the sharp edges typically desired for a barcode.
- Print all black data (default) uses only the K panel to print the portions of the image
that are identified as being black.
• Apply black extraction on: Note that this function is dependent on the image having
areas defined as text, graphics (lines, rectangles, and other non-text graphic objects), and
bitmaps (color images, photos, pictures, etc). If the image is flattened, then this function
does not apply.
- Black text applies black extraction to areas of the image identified as text.
- Black graphics applies black extraction to areas of the image identified as graphics.
- Black bitmaps applies black extraction to areas of the image identified as bitmaps.
Black bitmaps will extract only black out of monochrome bitmaps not from color
bitmaps. For extracting from color bitmaps, Area manager settings are used; see
Defined areas, Except defined areas, and Full card on Page 81.
• Black level:
Every dot of a printed image has an RGB color value that ranges from 0, 0, 0 (pure black)
to 255, 255, 255 (pure white).
The black level setting allows the user to specify the threshold value for any given pixel to
be treated as black. The maximum setting is 25, 25, 25.
To Next Page
Loading...
