4: Printer Settings and Adjustments
Printing Preferences
P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 81
Area manager:
This option is enabled when either the Defined areas (extract inside the zone) or the
Except defined areas (extract outside the zone) radio button is selected.
- Defined areas applies black extraction to areas of the image inside of the zones
specified in the Area manager.
- Except defined areas applies black extraction to areas of the image outside of the
zones specified in the Area manager.
- Full card applies black extraction to the entire image.
- Orientation: The Orientation selection sets the image orientation to either Portrait or
Landscape.
- Units: The Units selection sets the units to either inches or mm (millimeters). The X-
dimension, X-offset, Y-dimension, and Y-offset reflect these units.
To create a zone: Select the rectangle icon , click on an area of the image to establish
the first corner of the zone, drag the cursor until the zone is the desired size and shape,
then release the mouse button. Note that multiple zones can be defined.
To select, move, or resize a zone: Select the arrow icon , click on a zone to select it,
then drag it to move it, or drag on the edges to resize it.
To delete a zone: Select the rectangle icon with an “X” through it , then click on the
zone that you want to delete.
To Next Page
Loading...
