Zebra ZXP Series 3 - Setting Up the Printer Driver

122 Zebra ZXP Series 3 Card Printer User’s Manual P1058486-002
E: CardSense Single Card Feed Mode
Setting Up the Printer Driver
Card Setup tab allows the user to set the single card feed mode.
To access the Card Setup tab, select Start > Devices and Printers. Right click on the Zebra
ZXP Card Printer listing, then select Printing preferences > Card Setup.
Step 1. Select the Single feeder slot from the Current Status dropdown menu (arrow above).
Step 2. Click the Apply button, then click the OK button.
Important • You can disable Single Feed Support and return to printing cards from the Card
Feeder. You do not have to remove the components of the Single Card Feed Kit in order to
operate in normal mode.