E: CardSense Single Card Feed Mode
P1058486-002 Zebra ZXP Series 3 Card Printer User’s Manual 123
Printing a Single Card
Step 1. Cards are inserted one at a time into the slot on the front of the printer. Do not feed
more than one card at a time. Note that the card must be fully inserted before printer
turns on and accepts the card.
Step 2. The card is printed.
Step 3. The printed card is ejected out through the same (input) slot.
INSERT CARD
ZEBRA
ZXP Series 3
Note • If single-card feeding will be the normal mode of operation, you may select that
mode through the driver software. In single card feed mode, the card will not be printed until
the print job has been sent to the printer and the card to be printed has been inserted into the
single card feed slot
To Next Page
Loading...
