5: ZXP Series Toolbox
Configuration
P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 109
Configuration
Job Log
The Job Log is a utility that builds a text file with separators. The only data that is logged is
what is selected from the list in the contents area. The data set can be uploaded at any time to a
central archive, thus providing a means for security officers to validate a card by comparing it
with tamper-proof real data.
• Enable logging - If this box is checked, the logging feature is enabled.
• Log File Definition - Choose one of the following options:
- If the “Create new log file each day” box is unchecked, the data is saved to a log file
of your choice (Filename).
- If the box is checked, the data is saved to log file with the day’s date; e.g.,
ZXPLog_2013_4_15.
- In addition to the Filename, you may wish to enter a special field Separator Character.
The default field Separator Character is “|”.
Note • Access to this feature is controlled via Advanced Security > Security Roles.
To Next Page
Loading...
