Zebra ZXP Series 8 - Using the Print Viewer Utility

126 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002
5: ZXP Series Toolbox
Technology
• Card Types (continued):
- Input Data: Includes address, length, input, and
PIN.
• Writing Data: Set the address, set the length, enter data in Input field, and click
the Write button.
• Reading Data: After writing data (above), click the Read button. “Read
successful” and the value read from the smart card will be displayed in the
Messages section.
• Click the Set PIN button to set the security code for the card.
• Click the Write Raw Data button to write “raw data” to a card.
The Get ATR button returns the ATR (Answer To Reset) result from the card reader.
This is useful to identifying the type of smart card inserted into the printer.
The Eject Card button ejects the card.
- Click the Messages checkbox to show the output in hex format.