6: Cleaning
Cleaning the Printer
P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 133
Step 3. To clean the Y-Drive Rollers.
a. Select Clean Front Card Path to run the Y-Roller Cleaning Routine.
b. Use the Y-Roller Cleaning Card.
c. Follow the OCP instructions.
d. When complete, the OCP will return to the Clean Printer Menu.
Step 4. To clean the Heated Rollers.
a. Select Clean Transfer Path to run the Heated Roller Cleaning Routine.
b. Use the Hot Roller Cleaning Card.
c. Follow the OCP instructions.
d. When complete, the OCP will return to the Clean Printer Menu.
e. Then use the Hot Roller Cleaning Card to clean the Platen; see Page 134.
Exit the Printer Menus by selecting
RETURN at each menu level (Clean Printer Menu,
Advanced Settings Menu, and Main Menu).
NOTE • To avoid a long wait while the Heated Rollers cool to 70
o
C, perform cleaning
before the rollers heat; i.e., when first turned on and the rollers are still cold.
To Next Page
Loading...
