P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 167
Appendix B
Setting Custom Card
Specifications
B.1 Introduction
This document is to be used for setting the specifications for cards not listed in the Card type
in use dropdown menu; arrow below. Setting the specifications for a non-listed card type is a
three-step process that uses the Card Setup Tab.
If you need help setting the specifications for your card type, contact the Zebra Card
Testing Service at:
Phone: 1-866-569-9086 (Toll Free)
Email: cardtestingservice@zebra.com
To Next Page
Loading...
