182 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002
B: Setting Custom Card Specifications
Step 2. Increase Front Transfer Temperature:
a. From the Card Specifications window, make a note of the default front transfer
temperature settings.
b. Increase the appropriate (single or double side) front transfer temperature by 5.
c. Click on the OK button.
d. Print a test card.
e. Examine the test card.
• If there is noticeable improvement, continue increasing the front transfer
temperature by 5, printing a test card, and examining the resulting card. Stop
when the problem is corrected or there is no more improvement. If the
problem is corrected, no more adjustment is required; otherwise go to Step 3.
• If there is no noticeable improvement, return the temperature to its default
setting; and go to Step 3.
To Next Page
Loading...
