Zebra ZXP Series 8 - Page 96

92 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002
4: Printer Settings and Adjustments
Printing Preferences
Security ID
The Security ID option automatically prints a unique text value in a fixed location on a card
using the UV panel.
1. Click on the Security ID button (circled above) to activate this option.
2. Observe the UV Panel popup.
3. Select the Enable security ID auto print checkbox.
4. Specify the Text location. Select the location from four pre-defined areas of a card
(upper left, upper right, lower left, lower right).
5. Specify the Text category (MAC address, Printer serial number, or Custom text). If
Custom text is specified, enter the text in the Custom text field, 32 characters maximum.
6. To enable the Inverted text option, select the Inverted text checkbox.
7. Click on the OK button.