Zehnder Rittling ComfoSense C Series User Manual

27
Ŷ schedules the ventilation
@HQkNV
Ŷ
schedules the ComfoCool*
function. (* Optional, if
HMRS@KKDCNM'14
3. Press
.
4. Select EDIT, press
.
5. Press
or to choose the
required days:
Ŷ 6$$*+8DUDQXC@X
Ŷ ,.-%1(LHCVDDJR
Ŷ 2 24-VDDJDMCR
Ŷ ,.-# 8RHMFKDC@X
Ŷ 
Ŷ 
Ŷ 24-# 8
6. Press
, the display shows
START.
7. Press
or to choose the
required START time (hours).
8. Press
SNBNMjQL
9. Press
or to choose the
required START time (minutes).
10. Press
SNBNMjQLSGDCHROK@X
shows END.
11. Press
or to choose the
required END time (hours).
12. Press
SNBNMjQL
13. Press
or to choose the
required END time (minutes).
14. Press
SNBNMjQL
15. Press
or to choose the
required function setting.
16. Press
SNBNMjQL3GDCHROK@X
shows SAVED.
17. The display returns to the
step programmer. Add steps
if necessary using the same
procedure.
Delete a schedule or step
4RDSGHRETMBSHNMSNCDKDSD@BNLOKDSD
schedule or a single step from a
schedule. To delete all schedulers at
once use the RESET function.
1. Press
or to choose the
wanted scheduler, the display
shows SCHED:
Ŷ SCHED +
schedules
the ventilation
@HQkNV
Ŷ SCHED +
schedules the
ComfoCool
function.
2. Press
.
3. 2DKDBS#$+OQDRR
.
4. Press
or to choose the
step to delete:
 CDKDSDR@KKRSDORHMSGD
RBGDCTKDQ
1...2 deletes the selected step
from the scheduler.
5. Press
SNBNMjQL
3.10 Bypass
BYPA
To set the heat recovery control of
SGDAXO@RRETMBSHNM@KHSXENQ@RODBHjB
duration.
Ŷ 43.SGDTMHSVHKKBNMSQNK
the heat recovery control
@TSNL@SHB@KKXCDE@TKSRDSSHMF
Ŷ OFF: the unit will increase
the heat recovery control to a
L@WHLTL
Ŷ OPEN: the unit will decrease
the heat recovery control to a
LHMHLTLHEONRRHAKDNTSCNNQ
air is supplied directly into the
dwelling).

Zehnder Rittling ComfoSense C Series Specifications

General

Brand	Zehnder Rittling
Model	ComfoSense C Series
Category	Control Unit
Language	English