Zeiss AT 030 - Page 41

Instruction for use 7 Maintenance
AT 030 7.2 Adjusting the swivel-mounted tonometer holder with square mounting
interface (version a)
319300-9120-000-GA-GB-240320 35 / 60
C
A
B
D
1
2
3
4
5
Figure8: Adjusting options on the swivel-mounted tonometer holder,
versiona (square mounting interface)
1 Clamping screw for image
focus
A Height adjustment
2 Adjusting screw for height
adjustment
B Coaxial adjustment
3 Swivel arm C Image focus
4 Base plate D Lateral adjustment
5 Alignment holes
1 2
3
4
5
Figure9: Clamping and adjusting screws on the swivel-mounted
tonometer holder,
1 Clamping screws for height
adjustment and coaxial
adjustment
2 Swivel arm
3 Dovetail 4 Clamping screws for
adjusting image focus and
lateral adjustment
5 Swivel arm