Need help?Do you have a question about the Zeiss MCS 600 and is the answer not in the manual?
General| Brand | Zeiss |
|---|---|
| Model | MCS 600 |
| Category | Measuring Instruments |
| Language | English |
Manual guides operators on setup and operation; keep it accessible at the device.
Modular spectrometer system for various optical measurements using slide-in cassettes.
Requirements for warranty claims include authorized repair and annual inspection by manufacturer.
Explains warning and information symbols used in the manual for hazard communication.
Device must be operated by trained personnel, plug into grounded socket, check line voltage.
Manufacturer guarantees against material/production defects; improper use voids warranty.
Compliance with EU directives (RoHS, WEEE) and certified environmental management system (ISO 14001).
Essential for precise results; procedure depends on geometry and configuration.
Use only specified spare parts. Operator is responsible for effects of using non-manufacturer parts.
Avoid collision; install in safe, accessible location. Note environmental parameters.
Device designed for horizontal use; specifies voltage, frequency, temperature, humidity, altitude.
Describes housings, spectrometer cassettes, and lamp cassettes as modular components.
Discusses housing types, safety notes, overview, specifications, and configuration.
Overview, operating notes, and replacement procedure for the MCS 601 UV-NIR cassette.
Overview, operating notes, and replacement procedure for the MCS 611 NIR 2.2 cassette.
Overview, operating notes, and replacement procedure for the MCS 621 VIS II cassette.
Details the intended use of the SVS 600 power supply cassette.
Covers intended use, operating notes, and specifications for various lamp cassettes.
Overview, safety, spare parts, and changing procedure for the BLX 600/SMA lamp.
Overview, safety, spare parts, and changing procedure for the BLX 600/CZ6 lamp.
Overview, safety, spare parts, and changing procedure for the BLX 606 lamp.
Overview, operating notes, safety, spare parts, and changing procedure for CLD 600.
Overview, operating notes, safety, spare parts, and changing procedure for CLH 600.
Overview, operating notes, safety, spare parts, and changing procedure for CLH 600 F.
Overview, operating notes, safety, spare parts, and changing procedure for CLH 606 A.
Recommends CAT 6 S/FTP cable and notes crossover cable for older adapters.
Guide to manually configure PC network adapter for connection when DHCP is not used.
Steps to configure PC network adapter to obtain IP automatically for DHCP networks.
Describes default IP settings and three methods to change IP address, subnet, and gateway.
Instructions for cleaning surfaces, emphasizing disconnecting power and avoiding fluids.
Emphasizes using only specified spare parts for maintenance.
Recommends ZEISS customer service for repairs and service contracts.
To Next Page
