General Safety Information
MCS 600
2 General Safety Information
The MCS 600, including its original accessories, may only be used for the applica-
tions described in this user manual. The manufacturer cannot assume any liability
for any other use of the device.
The device manufacturer does not accept any liability for damage caused by unau-
thorized persons tampering with the device. Furthermore, unauthorized tampering
will forfeit all warranty claims.
The MCS 600 is designed and built according to current engineering standards
and recognized safety regulations. The system bears the -symbol.
Basic safety requirements, standards and directives were applied while
designing the system. System safety is documented in the declaration of confor-
mity. All safety information is based on the current relevant regulations of the
European Union. In other countries, the respective applicable laws and national
regulations must be observed.
In addition to the safety instructions contained in this manual, use of the system
must also comply with accident prevention regulations and generally applicable
environmental protection regulations. The system has been designed in complian-
ce with the standards laid out in Annex 1.
To Next Page
Loading...
