Basic Information
MCS 600
Spectrometer Wavelength range Order number
MCS 621 UV-VIS 190* – 720 nm 000000-1358-354
MCS 621 UV-VIS C 190* – 720 nm 000000-1499-679
MCS 621 UV-VIS II 250 – 785 nm 000000-1481-131
MCS 601 UV-NIR 190* – 1015 nm 000000-1341-882
MCS 601 UV-NIR C 190* – 1015 nm 000000-1406-675
MCS 621 UV 195* – 390 nm 000000-1359-095
MCS 651 UV 200* – 620 nm 000000-1352-027
MCS 651 UV C 200* – 620 nm 000000-1456-561
MCS 621 VIS II 310 – 1100 nm 000000-1341-827
MCS 651 VIS 360 – 780 nm 000000-1352-114
MCS 651 NIR 695 – 1100 nm 000000-1352-118
MCS 611 NIR 2.2 910 – 2150 nm 000000-1348.839
MCS 611 NIR 1.7 HR 950 – 1690 nm 000000-1383.981
MCS 611 NIR 2.0 1340 – 2000 nm 000000-1389.644
1.3 Warranty
The following requirements must be met for warranty claims:
• Except for the activities listed in the "Maintenance manual" section,
no unauthorized work may be carried out on the device system.
Doing so may irreparably damage the device.
• Repair work must only be carried out by personnel authorized by the manufac-
turer. Contact Carl Zeiss Spectroscopy GmbH's customer service department
if any defects or faults occur on the device or individual components (service.
spectroscopy@zeiss.com).
• The MCS 600 should be inspected by Carl Zeiss Spectroscopy GmbH's custo-
mer service department at least once a year to ensure optimal and safe opera-
tion of the system.
Note
For details concerning the warranty, please refer to the General Terms
and Conditions of Carl Zeiss Spectroscopy GmbH available at
http://www.zeiss.com/corporate/en_de/legal-information/company-
information.html
*with low-solarization fibers
To Next Page
Loading...
