Zeiss MCS 600 - Specifications

17
MCS 600 | User Manual
MCS 600
3.2.4 Specifications
Designation Description
Power connection 100 – 240 V AC, 50/60 Hz
Power consumption < 100 VA (depending on component
configuration)
Fuses 2 x T2 A/H
Protection class IP 20
Fig. 2 19-inch housing, rear
6 7 8 149 13121110
Power plug
Fuse drawer
12 V DC for protective housing fan (not intended to be connected by the custo-
mer)
Fan
I
2
C bus, 9-pin D-SUB port (for customer service only)
Interface for configuring IP address (9-pin D-SUB port, RS 232)
37-pin D-SUB port for 16 x IN/OUT (for industrial use, shielded)
32-pin port for 16 x IN/OUT (for laboratory use, unshielded)
24 V connector 4 x GND (short-circuit proof, limited current)
6
7
8
9
10
11
12
13
14