Maintenance and Care
MCS 600
5 Maintenance and Care
5.1 Care
Care of the devices is limited to the following operations:
Warning
Prior to cleaning, the devices must be disconnected from the power
supply. Ensure that no cleaning fluids enter the devices.
The surfaces of the devices must be cleaned with commercially available cleaning
agents (not solutions!). In exceptional cases dirt which is difficult to remove can
be carefully treated with pure benzene or petroleum ether.
Caution
Please observe the legal regulations governing the handling of
inflammable liquids and solvents.
5.2 Maintenance
Only the parts listed in the respective sections under "Spare parts" may be used
for maintenance of the system. These parts can be requested by contacting
customer service and providing the order number.
5.3 Service
All repairs of mechanical, optical or electronic components inside the system may
only be performed by ZEISS customer service or specially authorized personnel.
To ensure that your system remains perfectly functional and optically configured
for a long time, we recommend concluding a service/maintenance contract with
ZEISS. For subsequent orders or if service is required, please contact your local
ZEISS representative.
To Next Page