MCS 600
Fig. 1 19-inch housing,
front
ON/OFF switch
Interface for configuring IP address, gateway address and subnet mask
via null modem cable (9-pin D-SUB port, RS 232)
ECCU
Ethernet port (10/100)
64-pin connector for electrical connection of up to four 14 TE spectro-
meter cassettes and one lamp cassette (right)
1
2
3
4
5
1
2
4 53
3.2.3 Overview
Note
The IP address can also be changed via ethernet once a connection
is established. The default address is 192.168.0.100.
To Next Page
Loading...
