Zeiss CIRRUS User Manual

Quickstart Guide
Social distancing with your ZEISS CIRRUS: Extended cable connection
This Quickstart Guide provides an overview on how to setup and operate CIRRUS using an extended cable connection.
This option is intended for the Operator and Patient to be in the same room at a safe distance. You will need a table,
monitor, extended cable, keyboard, and mouse.
Step 1
Power down your CIRRUS.
Step 3
Once you remove the backcover, the available ports for
connection will be exposed.
Step 2
Remove back cover from Instrument by pressing down on
two tabs.
Step 4
Locate the port you will use to connect your device.
(Please see available ports in the Compatibility section
of this Quickstart Guide).

Zeiss CIRRUS Specifications

General

Scan Width	Up to 12 mm
Power Requirements	100-240 VAC, 50/60 Hz
Type	Optical Coherence Tomography (OCT)
Manufacturer	Zeiss
Model	CIRRUS
Scan Depth	2.0 mm
Scan Speed	27, 000 A-scans per second
Axial Resolution	5 µm
Transverse Resolution	15 µm
Wavelength	840 nm
Connectivity	DICOM, Ethernet, USB
Software	CIRRUS
Fundus Image	Yes, fundus camera included in some models (e.g., CIRRUS photo 800)

Summary

Extended Cable Connection Setup

Step-by-Step Connection Procedure

Guides through powering down, accessing ports, connecting cables, and powering up for extended cable connection.

Peripheral Connectivity Options

Recommended Cable Lengths

Specifies recommended lengths for VGA, DVI, DisplayPort, and HDMI cables for optimal performance.

Keyboard and Mouse Extension Options

Details options for extending keyboard and mouse connectivity, including USB extension and wireless accessories.

Ports and Video Signal Details

Summarizes available ports, video signal resolutions, and interface types for CIRRUS 5000/500 and 6000 models.