Why does the PI travel up by itself on Zeiss IOLMaster 700 Medical Equipment?
The issue of the PI (presumably Pupil Image) traveling up on its own can occur if a mouse is attached and the user right-clicks. Avoid right-clicking with a mouse attached to prevent this behavior.
General| Axial Length Measurement Accuracy | ± 0.02 mm |
|---|---|
| Central Corneal Thickness (CCT) Measurement | Yes |
| Anterior Chamber Depth (ACD) Measurement | Yes |
| Lens Thickness Measurement | Yes |
| Axial Length Measurement Range | 14 to 38 mm |
| Keratometry Measurement Range | 30.0 D to 60.0 D |
| Keratometry Measurement Accuracy | ± 0.1 D |
| White-to-White Measurement Range | 9.0 mm to 13.5 mm |
| Anterior Chamber Depth Measurement Range | 1.5 – 6.0 mm |
| Lens Thickness Measurement Range | 2 to 6 mm |
| Pupil Diameter Measurement Range | 1.5 mm to 8.0 mm |
| Measurement Time | Less than 1 second |
| Display | Touchscreen display |
| Data Connectivity | USB, Ethernet |
| IOL Calculation Formulas | Including SRK/T, Hoffer Q, Holladay |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Technology | Optical Biometry with Swept-Source OCT |
Explains the purpose and necessary prerequisites for offline license activation.
Details the initial login, settings access, and USB drive preparation for activation.
Steps for saving the activation request file to USB and transferring it to an internet-connected computer.
Logging into the FlexNet portal using the Activation ID to manage entitlements.
Initiating the manual activation within the FlexNet portal.
Selecting the activation file and saving the generated response XML to the USB drive.
Transferring the response XML file back to the IOLMaster 700 and importing it.
Checking for a success message and verifying date/time settings.
Shutting down and restarting the device to confirm the license is active.
To Next Page
