Need help?Do you have a question about the Zeiss OPMI Lumera i on floor stand and is the answer not in the manual?
Explains hazard and information symbols used in the manual for user safety.
Defines the intended users and the specific medical applications for the OPMI Lumera i.
Provides essential notes for operators, including duties and user requirements for safe operation.
Details requirements for operating the device and safety checks before, during, and after use.
Outlines measures to prevent phototoxic injury, covering illumination and exposure parameters.
Describes specific safety features like backup lamp, filter wheel, and device labels.
Details the meaning of various symbols and labels found on the OPMI Lumera i device.
Introduces the main components of the OPMI Lumera i system: microscope, XY coupling, stand, and foot control panel.
Details the microscope's components like tubes, eyepieces, body, and objective lens, along with their controls.
Describes the structural parts of the stand: suspension arm, carrier arm, stand column, and base.
Details the design, controls, and storage of the foot control panel for system operation.
Explains how to connect accessories for documentation and co-observation via video lenses or beam splitters.
Describes the EDIS system for displaying configurable data superimposed on the microscope image.
Details the 1Chip HD Camera option, including its components and connection.
Provides instructions and precautions for safely moving the OPMI Lumera i system.
Guides on changing microscope tubes, eyepieces, or objective lenses for specific applications.
Explains how to connect video cameras and documentation accessories to the system.
Details the procedure for correctly connecting the light guide to the surgical microscope.
Instructions for performing the balance setting to ensure stable microscope positioning.
Provides steps for installing the optional 1Chip HD Camera, including safety precautions.
Details the necessary cable connections for the 1Chip HD Camera system.
Guides on connecting the stand to power, foot control panel, and other accessories.
Covers system setup, including limiting arm movement, positioning, tilting, and microscope adjustment.
Instructions on using asepsis caps and drapes for sterile operation of the microscope.
Procedure for switching the OPMI Lumera i system on and off, including self-test.
Checklist for verifying all system functions before each use for patient safety.
Overview of the OPMI Lumera i menu system accessible via the 5.7" control panel.
Details on using control panel functions like Back, Save, and general button operations.
Instructions for creating, selecting, editing, and deleting user profiles and language settings.
Guides on switching the light source on/off and setting its start value for optimal illumination.
Procedures for setting zoom system start values, displaying magnification, and zoom/focus link.
Instructions for assigning user-specific functions to foot control panel buttons.
Covers system settings like XY reset, parking position, system options, and speed adjustments.
General guidance on the typical workflow and adjustments during a surgical procedure.
Addresses failures of the halogen light source and main functions like XY, focus, and zoom.
Lists common system malfunctions, possible causes, remedies, and references for resolution.
Details malfunctions of the foot control panel and interpretation of error messages on the control panel.
Covers system maintenance requirements, intervals, and safety checks for optimal device life.
Step-by-step guide for safely changing the halogen lamp module, including precautions.
Instructions for cleaning optical and mechanical surfaces, and preventing fogging.
Procedures for sterilizing asepsis caps and disinfecting device surfaces using approved agents.
Information on proper disposal of electrical devices and environmental protection measures.
Details essential performance features and technical specifications of the OPMI Lumera i.
Manufacturer's declaration and guidelines for electromagnetic compatibility of the device.
Details compliance with IEC 60601-1-2 for electromagnetic interference and immunity.
Guidance on system combinations and ensuring safety when connecting electrical devices.
Lists ordering data for microscope components, accessories, and country-specific parts.
Provides classification of the device according to IEC 60601-1 and regulatory compliance.
Specifies the admissible ranges for temperature, humidity, and atmospheric pressure during operation and storage.
Alphabetical list of technical terms used in the manual with their definitions.
Alphabetical list of abbreviations used in the manual with their full meanings.
General| Type | Surgical Microscope |
|---|---|
| Stand Type | Floor stand |
| Focusing | Motorized |
| XY Movement | Motorized |
| Integrated HD Video Camera | Optional |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Working Distance | 200mm - 500mm |
| Illumination | LED illumination |
| Camera Integration | Yes |
| Objective Lens | f = 200 mm, f = 250 mm (optional) |
| Dimensions | Varies with configuration |
To Next Page