Need help?Do you have a question about the Zeiss S7 / OPMI VISU 160 and is the answer not in the manual?
General| Type | Surgical Microscope |
|---|---|
| Working Distance | 200 mm / 250 mm / 300 mm / 350 mm / 400 mm |
| Objective Lens | f = 200 mm / 250 mm / 300 mm / 350 mm / 400 mm |
| Eyepieces | 12.5x widefield |
| Focusing | Motorized |
| XY Movement | Motorized |
| Mounting | Floor stand, wall mount, or ceiling mount |
| Field of View | Depends on magnification and objective lens |
| Depth of Field | Depends on magnification and objective lens |
| Power Supply | 100-240 V, 50/60 Hz |
Explains hazard symbols (WARNING, CAUTION, NOTE) and information symbols.
Covers intended use, operator notes, legal regulations, and operational requirements.
Details measures to prevent phototoxic injury and explains device labels.
Details microscope components, illumination system, and light sources.
Explains controls, displays, connections, and binocular tubes/eyepieces.
Guides on mounting components, accessories, and connecting the system.
Covers suspension arm adjustments, sterile use preparation, and general system setup.
Provides a checklist for safe operation and instructions for positioning the device.
Guides on switching the device on/off and essential operational safety.
Addresses failures of main functions like X-Y coupling, zoom, and illumination.
A table listing common problems, their causes, and remedies.
Instructions for cleaning, sterilization, and disinfection of the device.
Covers maintenance intervals, safety checks, and replacing the halogen lamp.
Provides detailed technical data and ambient operating conditions.
Lists ordering information, accessories, and regulatory compliance details.
To Next Page