Need help?Do you have a question about the Zeiss SL 120 and is the answer not in the manual?
General| Type | Slit Lamp |
|---|---|
| Slit Width | 0 to 14 mm |
| Slit Length | 1 to 14 mm |
| Filters | Blue, green, neutral density |
| Light Source | Halogen |
Explains hazard and instruction symbols with their meanings.
Details device classification and compliance with medical device directives.
Provides guidelines for safe installation and operational practices.
Covers instrument checks and routine maintenance for reliability.
Outlines crucial safety precautions related to the instrument's electrical components.
Lists essential checks and conditions required before operating the instrument.
Advises on safe handling of mechanical parts and patient positioning.
Specifies the designated purpose and scope of the SL 120 Slit Lamp.
Provides an overview of the SL 120 Slit Lamp's main components and overall structure.
Details the components and controls of the stereomicroscope and slit projector.
Identifies and labels the components of the instrument base and headrest.
Describes the specifications and connections of the power supply unit.
Lists and describes optional accessories available for the slit lamp.
Details the use and installation of the optional focusing rod accessory.
Describes the fixation lamp accessory and its connection.
Explains the function and mounting of the beam splitter for accessory connection.
Details the features and measurement process using the micrometer eyepiece.
Explains the fender plate's purpose in preventing collision during setup.
Describes the adapter for connecting digital cameras for photographic documentation.
Details the DigiCam illuminator for enhanced photographic or video documentation.
Lists additional accessories like breathing shields and paper pads.
Provides instructions for assembling the main SL 120 Slit Lamp unit.
Instructions for attaching various accessories to the slit lamp.
Step-by-step guide to mounting the beam splitter accessory.
Details the process for mounting the filter changer accessory.
Provides instructions for assembling the DigiCam Illuminator accessory.
Details the procedure for assembling the compact video attachment.
Provides instructions for attaching the miniature camera to the slit lamp system.
Outlines the essential preparation steps before operating the slit lamp.
Instructions for switching on and using the power supply unit.
Guides on how to correctly position the patient for examination.
Provides general guidance and tips for operating the slit lamp.
Provides guidance on safe and effective use of the illumination system.
Specific instructions and recommendations for performing tonometry.
Details the procedure for gonioscopy, including contact lens use.
Step-by-step instructions for safely replacing the lamp bulb.
Provides guidelines for cleaning optical components and patient-contact surfaces.
Outlines the requirements for annual safety inspections by authorized personnel.
Information on the proper disposal of the instrument according to regulations.
Details the technical specifications, environmental conditions, and performance parameters of the SL120.
Details the specifications for the optional power supply unit for the DigiCam illuminator.
To Next Page
