Zeiss HFA3 User Manual (English)

To Next Page

Quickstart Guide

Social distancing with your ZEISS HFA3: Extended cable connection

This Quickstart Guide provides an overview on how to set up and operate the ZEISS HFA device using an extended cable

connection. This option is intended for the Operator and Patient to be physically separated while allowing operation

at a safe distance. You will need a table, monitor, extended cable, keyboard, and mouse.

What you’ll need for

extended connection

•

Additional video display

- Standard Monitor, TV, or Projector capable of handling

1024x768 video resolution, 60Hz refresh rate, with one

of the video display interfaces described below.

•

Monitor cable: recommend limit length to 5 meters, or less

- HFA3 side: Passive DisplayPort or VGA.

- Monitor side: appropriate connection for

additional monitor.

•

USB keyboard and mouse - choice of: wireless or wired.

•

Extender to achieve social distance length if using

wired option.

Disclaimers

• The following suggestions are not intended as a comprehensive solution for managing the clinical workflow in ophthalmic offices as related to

COVID-19 virus (or similar) management.

• Any cables used for connecting additional video displays and extended peripherals should be routed and safely secured to avoid any potential

tripping hazards.

• W

ith the exception of peripherals available from ZEISS with the HFA, specific video display devices and peripherals are not guaranteed to have been

tested or verified by ZEISS. Some video displays may require adjustment of the native display graphics configuration.

• It is recommended that the lengths of any extension cables used are limited to a maximum of six meters (19.7 ft) to ensure reliability.

• All periphery devices are not sold by ZEISS and is customer responsiblity.

6 ft. safe distance

Extended set-up using cable connection

Need help?

Do you have a question about the Zeiss HFA3 and is the answer not in the manual?

Zeiss HFA3 Specifications

General

Model	HFA3
Manufacturer	Carl Zeiss Meditec
Technology	Automated perimetry
Stimulus Duration	200 ms
Stimulus Color	White
Power Requirements	100-240 VAC, 50/60 Hz
Connectivity	Ethernet, USB
Operating System	Windows
Test Strategies	Full Threshold
Stimulus Size	Goldmann III
Background Illumination	31.5 asb (10 cd/m²)
Projection Technology	LED-based
Fixation Monitoring	Heijl-Krakau
Available Tests	24-2, 30-2, 10-2, Macula, Glaucoma Hemifield Test (GHT)
Software	FORUM Eye Care Data Management
Display	Integrated touchscreen display