What to do if Zeiss i.Profiler plus Medical Equipment unintentionally shuts down?
If your Zeiss Medical Equipment shuts down abruptly, it is likely due to voltage interruptions such as a mains failure or power outage. Restart the device and redo any measurements once power is restored. Please note that any unsaved progress will be lost due to the device's self-protection mechanisms.
Why doesn't the standby light turn on for my Zeiss i.Profiler plus Medical Equipment?
If the standby indicator light doesn't illuminate after switching on the power and pressing the Standby button, it could be due to the power plug not being properly connected, or defective fuses. Ensure the power plug is securely plugged into the mains power. Also, check the fuses in the mains switch module.
General| Brand | Zeiss |
|---|---|
| Model | i.Profiler plus |
| Category | Medical Equipment |
| Language | English |
Explains the purpose and availability of the user manual and other documentation.
Explains important safety symbols used in the manual and on equipment labels.
Covers device classification, intended use, and related specifications.
Defines required user experience and qualifications for operating the device.
Provides guidance and warnings regarding the proper disposal of the device and its packaging.
Overview of wavefront and topography measurement capabilities.
Information on the device's expected lifespan and associated warnings.
Guidelines for connecting the device to power and ensuring electrical safety.
Procedures for network integration, printer installation, and NAS device configuration.
Guidance for installing and connecting Atlas Review Software to the device.
Procedures for powering on the device and performing initial function tests.
Outlines user responsibilities, safety measures, and patient interaction during operation.
Details the correct procedures for positioning the patient for accurate measurements.
Detailed steps for safely powering down the device and its software.
Lists and resolves typical problems encountered with the device.
Procedures for replacing fuses and the print paper roll.
Instructions for cleaning and disinfecting the device to maintain hygiene and function.
Specifies ambient conditions for device use and details measurement ranges.
Information on EMC compliance, guidance, and RF equipment separation distances.
To Next Page
