Figures
000000-1520-928_GA_EN_021013
Figures
Fig. 1 Type plate on the i.Profiler
® plus
............................................ 10
Fig. 2 Measuring principle of the Hartmann-Shack sensor .............. 12
Fig. 3 Image of light spots on the camera chip (A) and image
of the reconstructed wavefront map (B) over the total
exit pupil. ............................................................................ 13
Fig. 4 Imaging beam path of a topography measuring device
with a Placido disc. .............................................................. 14
Fig. 5 The image of the rings of the Placido disc on the camera
for a normal cornea (A) and a distorted cornea (B). .............. 15
Fig. 6 i.Profiler
® plus
, view from the operator side ........................... 17
Fig. 7 i.Profiler
® plus
, view from the patient side ............................. 18
Fig. 8 Recessed handles on the underside of the i.Profiler
® plus
....... 21
Fig. 9 Connection panel on the i.Profiler
® plus
................................. 22
Fig. 10 Replacing fuses in the i.Profiler
® plus
..................................... 51