Why does the PI travel up by itself on Zeiss IOLMaster 700 Medical Equipment?
The issue of the PI (presumably Pupil Image) traveling up on its own can occur if a mouse is attached and the user right-clicks. Avoid right-clicking with a mouse attached to prevent this behavior.
General| Axial Length Measurement Accuracy | ± 0.02 mm |
|---|---|
| Central Corneal Thickness (CCT) Measurement | Yes |
| Anterior Chamber Depth (ACD) Measurement | Yes |
| Lens Thickness Measurement | Yes |
| Axial Length Measurement Range | 14 to 38 mm |
| Keratometry Measurement Range | 30.0 D to 60.0 D |
| Keratometry Measurement Accuracy | ± 0.1 D |
| White-to-White Measurement Range | 9.0 mm to 13.5 mm |
| Anterior Chamber Depth Measurement Range | 1.5 – 6.0 mm |
| Lens Thickness Measurement Range | 2 to 6 mm |
| Pupil Diameter Measurement Range | 1.5 mm to 8.0 mm |
| Measurement Time | Less than 1 second |
| Display | Touchscreen display |
| Data Connectivity | USB, Ethernet |
| IOL Calculation Formulas | Including SRK/T, Hoffer Q, Holladay |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Technology | Optical Biometry with Swept-Source OCT |
To Next Page
