Need help?Do you have a question about the Zeiss LSM 900 and is the answer not in the manual?
General| Microscope Type | Confocal Laser Scanning Microscope |
|---|---|
| Laser Wavelengths | 405 nm, 488 nm, 561 nm, 640 nm |
| Field of View | Up to 25 mm |
| Detector Type | GaAsP PMT |
| Technology | Confocal |
| Software | ZEN |
| Application | Material Science |
| Scanning Speed | Up to 8 frames per second (512 x 512 pixels) |
| Objective Magnification | 5x to 100x |
| Dimensions | Variable depending on configuration |
| Weight | Variable depending on configuration |
| Light Source | Laser diodes |
| Objectives | Variety of objectives available |
| Detection | Spectral detection |
References for downloads, safety data sheets, and regulatory compliance information.
Specifies acoustic noise, air conditioning, quality, EMC, and vibration parameters for optimal operation.
Defines necessary room size, clearance, and environmental conditions for system installation.
Details electrical voltage, frequency, power consumption, and overvoltage category requirements.
Outlines requirements for internet connection, cables, and protocols for remote diagnostics.
Covers laser safety classifications and biosafety levels relevant to laboratory integration.
Specifies requirements for compressed air, CO2, and other gases, including regulators and shut-off valves.
Provides guidelines for safely handling, transporting, and storing system components.
Summarizes customer obligations for meeting installation requirements and site readiness.
To Next Page
