Do you have a question about the Zeiss OPMI PROergo S7 and is the answer not in the manual?
Type | Surgical microscope |
---|---|
Objective Lenses | F=200 mm |
Working Distance | Variable, depending on objective lens |
Illumination | Integrated xenon illumination |
Camera Integration | Integrated video camera options available |
Focusing | Motorized |
Field of View | Variable, depending on magnification and objective lens |
Depth of Field | Varies with magnification and working distance |
Dimensions | Varies with configuration |
Explains symbols used for safety information and warnings.
Lists necessary checks and conditions before device use.
Details all safety labels and markings found on the equipment.
Lists and describes the main parts of the microscope and suspension systems.
Details the setup and constituent modules of the microscope.
Explains the setup and components of the floor-mounted system.
Details the setup and components of the ceiling mount including the lifting column.
Explains the device's user interface, menus, and navigation.
Guides on connecting cables and implementing strain relief.
Step-by-step procedures for connecting various suspension systems.
Procedures for balancing and limiting movement of suspension arms.
Detailed steps for achieving proper microscope balance.
Pre-operation checks specific to the floor stand system.
General steps for normal system operation.
Guide to using the autofocus feature.
Troubleshooting for critical system failures like focusing or zoom.
A table summarizing common faults, their reasons, and corrective actions.
Instructions for cleaning optical and mechanical surfaces.
Overview of maintenance tasks and recommended intervals.
Step-by-step guide for replacing halogen lamps.
Instructions for replacing xenon lamp modules.
Comprehensive specifications of the device components.
Electrical and mechanical data for various suspension systems.
Catalog numbers for microscope, suspension systems, and accessories.
EMC information and precautions.