Need help?Do you have a question about the Zeiss Axio Observer 3 and is the answer not in the manual?
Provides a table detailing equipment options and compatibility for Axio Observer 3, 5, and 7.
Describes the services included for microscope installation and setup by a ZEISS representative.
Provides instructions for unpacking the microscope and placing the stand on a work surface.
Provides instructions for removing dust caps and screwing objectives into the nosepiece.
Details the process of fitting various microscope stages, including mechanical, scanning, heatable, and gliding stages.
Explains how to connect the microscope to the mains power supply.
Provides instructions on how to disconnect the microscope from the main power supply.
Details mounting the microLED illuminator for transmitted and reflected light.
Covers fitting, adjusting, and replacing the bulb for the HAL 100 illuminator.
Details inserting the bulb, fitting, and adjusting the HBO 100 illuminator.
Provides an overview of the operating and function controls for different Axio Observer stand versions.
Describes the function of various controls like sideports, focusing drives, and light path selectors.
Explains how to select and use objectives, including labeling and magnification.
Offers a quick guide to setting up brightfield transmitted light microscopy using Köhler illumination.
Provides a quick guide for setting up brightfield reflected light microscopy using Köhler illumination.
Details the TFT display touchscreen interface, including screen layout, menu overview, and home page.
Covers various illumination and contrast techniques like bright field, phase contrast, DIC, and fluorescence.
Provides a table detailing equipment options and compatibility for Axio Observer 3, 5, and 7.
Describes the services included for microscope installation and setup by a ZEISS representative.
Provides instructions for unpacking the microscope and placing the stand on a work surface.
Provides instructions for removing dust caps and screwing objectives into the nosepiece.
Details the process of fitting various microscope stages, including mechanical, scanning, heatable, and gliding stages.
Explains how to connect the microscope to the mains power supply.
Provides instructions on how to disconnect the microscope from the main power supply.
Details mounting the microLED illuminator for transmitted and reflected light.
Covers fitting, adjusting, and replacing the bulb for the HAL 100 illuminator.
Details inserting the bulb, fitting, and adjusting the HBO 100 illuminator.
Provides an overview of the operating and function controls for different Axio Observer stand versions.
Describes the function of various controls like sideports, focusing drives, and light path selectors.
Explains how to select and use objectives, including labeling and magnification.
Offers a quick guide to setting up brightfield transmitted light microscopy using Köhler illumination.
Provides a quick guide for setting up brightfield reflected light microscopy using Köhler illumination.
Details the TFT display touchscreen interface, including screen layout, menu overview, and home page.
Covers various illumination and contrast techniques like bright field, phase contrast, DIC, and fluorescence.
General| Type | Inverted Microscope |
|---|---|
| Optical System | Infinity Optical System |
| Illumination | LED |
| Objective Lenses | Plan-Apochromat, Plan-Neofluar, EC Plan-Neofluar |
| Magnification Range | 5x to 100x |
| Stage | Motorized stage option available |
| Contrast Methods | Brightfield, Darkfield, Phase contrast, DIC, Fluorescence |
| Camera Ports | Multiple camera ports available |
| Camera | Compatible with various digital cameras |
| Focus Drive | Motorized focus drive |
| Software | Zen software |
| Software Compatibility | Windows |
| Weight | Approx. 30 kg |
| Automation | Fully motorized versions available for automated experiments, including focus, stage, and filter wheels |
To Next Page
