Need help?Do you have a question about the Zeiss Axio Imager.Z2 and is the answer not in the manual?
General| Brand | Zeiss |
|---|---|
| Model | Axio Imager.Z2 |
| Category | Microscope |
| Language | English |
Details important safety information and warnings for operating the Axio Imager microscope.
Explains various warning stickers and their meanings relevant to instrument operation.
Lists components and their compatibility with different Axio Imager stand types.
Explains objective labeling, magnification, numerical aperture, and immersion types.
Provides technical specifications including dimensions, weight, ambient conditions, and operating data.
Provides instructions for unpacking the microscope and safely setting it up on a worktable.
Details the procedure for attaching or changing the binocular tube or phototube on the stand.
Explains how to mount the tube lens turret onto the microscope stand.
Provides instructions for attaching camera adapters to the binocular phototube's camera port.
Details screwing in objectives and attaching or changing the condenser.
Provides step-by-step instructions for replacing the DIC prism in the universal condenser.
Details installing reflector turrets, compensator mounts, or modulator turrets.
Explains changing the stage carrier and setting stops for the dovetail guide adjustment.
Details attaching the condenser carrier and changing fine-drive components.
Details inserting filters into manual and motorized 2-position filter wheels.
Explains installing/removing P&C modules and changing filter sets in FL P&C reflector modules.
Provides instructions for changing the beam splitter in the FL P&C reflector module.
Explains how to activate or deactivate the high-performance focus feature for stage protection.
Details mounting the TFT display to the motorized stand and its docking station.
Provides instructions for installing the focus linear sensor on specific Axio Imager stands.
Explains how to connect the microscope (manual and motorized) to a power outlet.
Details the operating modes (OFF, CLASSIC, SMART) of the Light Manager for illumination control.
Introduces operation and configuration of the motorized microscope using the TFT touchscreen.
Details the application, configuration, and steps for KÖHLER brightfield illumination.
Describes the principle, configuration, and setting procedure for transmitted-light darkfield.
Explains the principle, configuration, and setting of transmitted-light phase contrast.
Details the principle, configuration, and adjustment of transmitted-light DIC.
Explains orthoscopic observation for determining crystal optical character via polarization.
Describes circular polarization contrast, noting its consistent appearance regardless of stage rotation.
Explains transmitted-light polarization for conoscopic observation to determine crystal optical character.
Explains reflected-light brightfield microscopy for opaque samples and its instrument requirements.
Describes incident light darkfield for examining specimens with surface deviations and scattering details.
Details the application, equipment, and adjustment for reflected-light DIC and C-DIC.
Explains the procedure for setting up reflected-light TIC (Total Interference Contrast).
Explains the epi-fluorescence technique for displaying high-contrast images of fluorescent substances.
Details reflected-light polarization for detecting bireflection and pleochroism in specimens.
Provides guidelines for proper instrument care, cleaning, and storage to prevent dust and humidity damage.
Covers performing checks, changing fuses on the manual stand, and basic maintenance.
Lists common problems, their causes, and remedies for operating the Axio Imager.
Provides contact information for Carl Zeiss service staff and authorized personnel for repairs.
To Next Page