EasyManua.ls Logo

Zeiss Axio Scope.A1 - User Manual

Zeiss Axio Scope.A1
123 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Manual
Axio Scope.A1
Microscope for Routine and Entry-Level Research

Table of Contents

Questions and Answers

  • M
    Melissa WellsAug 3, 2025
    Why is there shading in the field of view of my Zeiss Axio Scope.A1 Microscope?
    • M
      Miss Karen PerezAug 3, 2025
      If you're experiencing shading or brightness irregularities in the field of view of your Zeiss Microscope, or if the field of view isn't fully visible, several factors could be at play. Make sure that the push rod/gear knob vis/fot on the photo tube is in the correct functional position (end position). Ensure the nosepiece with the objective is fully engaged in its locking position. Check that the filter is correctly inserted in its compartment.
  • W
    wesleywellsAug 21, 2025
    What to do if the field of view is not fully visible on Zeiss Microscope?
    • D
      davistimothyAug 22, 2025
      If you're experiencing shading or brightness irregularities in the field of view of your Zeiss Microscope, or if the field of view isn't fully visible, several factors could be at play. The condenser might not be adjusted correctly. In this case you should adjust the condenser correctly. The aperture diaphragm might not be adjusted correctly, so you should adjust the aperture diaphragm correctly. The field diaphragm might not be adjusted correctly, so you should adjust the field diaphragm correctly.
  • H
    Heather OsborneNov 12, 2025
    How to improve low resolution on Zeiss Axio Scope.A1?
    • M
      Martha WashingtonNov 12, 2025
      If you're experiencing low resolution and poor contrast with your Zeiss Microscope, there are several potential causes. Ensure the opening of the aperture diaphragm is correctly adjusted according to the 2/3-rule and the texture of the sample you are using. Focus the condenser and turn the front lens correctly on or off. Use standardized frame glasses with a thickness of 0.17 mm. Turn the object carrier over, so the sample side shows up. Use immersion oil 518 N or 518 F by Carl Zeiss. Repeat the oiling procedure with fresh oil if there are air bubbles in the immersion oil. Clean the lens if there is immersion oil on the front lens of a dry objective. Adjust the correction setting to the correct thickness of the frame glass. Clean the soiled optical component, if there is dirt or dust on th...

Summary

INTRODUCTION

Safety Guidelines

Provides essential safety warnings and instructions for operating the microscope.

Warranty

Details the manufacturer's guarantee, terms, and conditions for defects.

Stand Variants

Describes the different stand parts and their combinations for microscope configurations.

Interface Diagram

Illustrates the connections and interfaces between different microscope components.

Summary of the Controls and Functional Elements

Lists and identifies all controls and functional elements of the microscope.

TECHNICAL MANUAL

Intended Use

Specifies the intended applications and fields for the Axio Scope.A1 microscope.

Systems Overview

Provides a visual overview of the microscope system components and accessories.

Technical Data

Lists the technical specifications, dimensions, mass, and environmental conditions.

STARTUP

Mounting the Standard Components

Step-by-step guide for unpacking and assembling the basic microscope stand.

Connection of the Power Supply

Instructions for connecting the power supply units to different microscope configurations.

Switching the Microscope and its Separate Illumination Fixtures on and off

Details how to turn the microscope and its illumination components on and off.

Mounting Optional Components

Guides on installing various optional components like tubes, stages, and illuminators.

Default Setting of the Microscope

Instructions for adjusting eyepiece distance and viewing height for optimal use.

OPERATION

Illumination and Contrasting Method

Explains various illumination and contrasting methods like Bright-Field, Dark-Field, DIC.

Operating and Functional Elements of Optional Components

Describes the function and operation of specific optional components and stand parts.

MAINTENANCE, CHANGING OF FUSES AND SERVICE

Maintenance

Outlines regular maintenance tasks for cleaning and preserving the microscope.

Technical Service

Covers checks, fuse replacement, and when to call service personnel.

Trouble Shooting

Provides a guide to identify and resolve common problems encountered during operation.

Service

Information on authorized service, maintenance contracts, and contact details.

ANNEX

List of Abbreviations

A glossary of abbreviations used throughout the manual.

Subject Index

An index of topics covered in the manual for quick reference.

Property Rights

Lists the patents protecting the instruments, components, and methods.

Zeiss Axio Scope.A1 Specifications

General IconGeneral
Microscope TypeUpright Microscope
IlluminationLED or Halogen illumination
Optical SystemInfinity-corrected optical system
Objective LensesVarious objectives available
CondenserVarious condensers available
Contrast MethodsPhase contrast, Differential interference contrast (DIC), Fluorescence
Camera CompatibilityCompatible with various camera systems
Camera PortC-mount
StageMechanical stage
Focus DriveCoarse and fine focus
Nosepiece5-position or 6-position nosepiece
Filter SlotsMultiple filter slots available
DimensionsVaries depending on configuration

Related product manuals