INTRODUCTION
Carl Zeiss Warranty Axio Scope.A1
14 M60-2-0007 e 05/08
1.2 Warranty
The manufacturer guarantees that the instrument is free of any material and workmanship defects upon
delivery. If you become aware of any deficiencies, please contact us immediately and take all necessary
precautions in order to avoid further damage. Upon notice of deficiencies it is up to the manufacturer’s
discretion to correct the deficiencies or to deliver a defect-free instrument. Defects due to ordinary wear
and tear (especially on wearing parts) and to improper handling are not covered by our warranty.
The manufacturer is not responsible for damages to the instrument which occur by maloperation,
negligence or any other manipulation of the instrument, especially if the damages occur while removing
or changing any parts or when using accessories from other manufacturers. This will immediately void the
warranty.
No maintenance or repair work, except for the instances mentioned in the manual, may be performed on
the microscopes. Only Carl Zeiss service personnel or personnel authorized especially by Carl Zeiss may
perform repair work on the microscopes. If your instrument happens to malfunction please contact the
Carl Zeiss Microscopy Service Department, Germany, (see p. 114) or the Carl Zeiss agency assigned to
your country.
To Next Page
Loading...
