STARTUP
Axio Scope.A1 Mounting the Standard Components Carl Zeiss
M60-2-0007 e 05/08 29
3 STARTUP
The customer has the choice to either set up or mount the Axio Scope.A1 himself before putting it into
operation, or have the Zeiss Customer Service do so for a fee.
Please read the Safety Guidelines carefully before assembling and operating the microscope.
The assembly activities described in the following chapters are mainly based on the assembly of a
microscope stand with an upper stand part and a lower stand part. The same activities apply when
assembling a microscope stand with an upper stand part and the stand column Vario – special activities
for the stand column Vario are described separately.
3.1 Mounting the Standard
Components
3.1.1 Unpacking and Mounting the
Microscope Stand
• Unpack all the components and check for
completeness according to bill of loading.
• Set up the microscope stand (
286H286HFig. 3-1/1) on a
vibration-free, plane, stable and non-flammable
surface.
• We advise to keep the original packaging in
case you want to store the instrument over a
longer period of time or need to send it back to
the manufacturer. If you want to dispose of the
packaging, please do so in an appropriate
manner.
Fig. 3-1 Setting up the microscope
To Next Page
Loading...
