Need help?Do you have a question about the Zeiss Standard 25 ICS and is the answer not in the manual?
General| Objectives | Achromatic objectives |
|---|---|
| Illumination | Built-in LED illumination |
| Eyepiece | 10x |
| Stage | Mechanical stage |
| Focusing | Coarse and fine focusing |
| Condenser | Abbe condenser |
| Interpupillary Distance Adjustment | Adjustable |
| Diopter Adjustment | Available on eyepieces |
| Power Supply | AC adapter |
Specifies the microscope's name and primary fields of use in biology and medicine.
Details the microscope's design, compact structure, and key features like objectives and illumination.
Outlines various microscope configurations and available accessory modules for customization.
Explains objective labeling, magnification, numerical aperture, and usage guidelines.
Lists available eyepieces with their specifications and catalog numbers.
Describes tools for measurement and counting, including stage micrometers and reticles.
Provides detailed technical specifications for dimensions, weight, operating conditions, and electrical data.
Instructions for safely removing the microscope from its packaging and placing it on a work surface.
Guides on attaching either the binocular tube or phototube to the microscope stand.
Step-by-step process for correctly mounting objectives onto the revolving nosepiece.
Details on how to insert the fixed and focusing eyepieces into the binocular tubes.
Explains how to insert eyepiece reticles into specific eyepiece models for measurement.
Instructions on adjusting eyepieces to compensate for vision impairments with reticles.
Procedures for adjusting the distance and height of the binocular tubes for comfortable viewing.
How to mount the specimen holder onto the mechanical stage for specimen placement.
Instructions for attaching different types of condensers to the microscope.
Specific steps for attaching the 0.9 Z condenser, including centering screws.
Guide to attaching the phase contrast condenser II, noting orientation and knob position.
Steps for safely connecting the microscope to the electrical power supply.
Instructions for powering on the microscope and adjusting initial brightness settings.
Detailed guide for setting up brightfield illumination using the Köhler method.
Procedures for setting up phase contrast microscopy, including equipment and settings.
How to set up darkfield microscopy for viewing small objects and achieving color fidelity.
Steps for configuring polarization contrast, including polarizer and analyzer usage.
Guide on using stage micrometers and eyepiece reticles for accurate length measurements.
General instructions for attaching cameras for photomicrography.
Specific steps to attach an SLR camera using adapters and T-2 connectors.
Instructions for attaching the MC 80 DX microscope camera and film cassette.
Overview of video adapters for connecting CCD cameras for video documentation.
How to install and use the 8x drawing eyepiece for microscopic drawing.
Guidelines for cleaning optical surfaces, handling the instrument, and proper storage.
Introduction to common problems and their solutions, focusing on fuses and lamps.
Step-by-step guide on how to safely replace blown fuses in the instrument.
Instructions for safely replacing the microscope's halogen illumination lamp.
A comprehensive table listing problems, their causes, and recommended remedies for quick diagnosis.
A list of available spare parts, consumables, and necessary tools with their catalog numbers.
Information on how to contact Zeiss service for repairs or maintenance contracts.
Glossary of acronyms and abbreviations used throughout the manual.
Definitions and explanations of physical and technical units mentioned in the document.
Details on the instrument's compliance with international quality management standards.
Official statement confirming the product's compliance with European Community directives.
To Next Page