How to fix a Zeiss Stemi 305 Microscope when the illumination cannot be switched on?
If the stereo microscope illumination cannot be switched ON, first check the connection to the power supply and ensure it is properly established. Then, switch the power switch on the back of the stereo microscope to the ON position. If the issue persists, the power unit might be faulty and require replacement.
What to do if additional reflected-light illuminators are not lit on a Zeiss Microscope?
If the additional reflected-light illuminators are not lit on your Zeiss Microscope, check if the power supply cable RJ 12 is properly plugged in. If it is, verify that the reflected light is switched ON and not dimmed by pressing and turning the knob several times to switch the reflected light ON and increase its intensity.
Why is the transmitted-light illuminator not lighting up on my Zeiss Stemi 305 Microscope?
If the transmitted-light illuminator on your Zeiss Microscope does not light up, first ensure that the transmitted light is switched ON and not dimmed by pressing and turning the rotary/push-button to switch the illumination ON and increase its intensity. If it still doesn't light up, check if the transmitted light is properly connected by opening the stand K EDU or K LAB and connecting the plug-in connectors of the LED illumination.
What to do if the vertical reflected-light illumination is not lit on a Zeiss Microscope?
If the vertical reflected-light illumination is not lit on your Zeiss Microscope, ensure that the power supply cable RJ 12 is correctly inserted.
How to fix Zeiss Microscope if stereo microscope illumination cannot be switched ON?
If the stereo microscope illumination on your Zeiss microscope won't switch on, first check the power supply connection and ensure it's properly connected. Also, verify that the power switch on the back of the microscope is turned ON. If the issue persists, the power unit might be faulty and needs replacement.
What to do if additional reflected-light illuminators are not lit on Zeiss Stemi 305 Microscope?
If the additional reflected-light illuminators on your Zeiss microscope are not lighting up, ensure the RJ-12 power supply cable is correctly inserted. Also, check that the reflected light is switched ON and not dimmed. To do this, press and turn the knob several times to switch the reflected light ON and increase its intensity.
Why transmitted-light illuminator does not light up on Zeiss Stemi 305?
If the transmitted-light illuminator on your Zeiss microscope does not light up, first ensure that the transmitted light is switched ON and the intensity is properly adjusted. Press and turn the rotary/push-button to switch the illumination ON and increase its intensity. If it still doesn't work, check if the transmitted light is properly connected.
How to stop Zeiss Stemi 305 mount from moving down by itself?
If the microscope mount on your Zeiss microscope moves down by itself, it may be because the focusing drive is too easy to move. You can adjust the ease of motion of the focusing drive.
What causes a dirty transmitted-light illuminator or inoperable control lever on a Zeiss Microscope?
If the transmitted-light illuminator on your Zeiss Microscope is dirty or the control lever cannot be actuated, it could be due to liquids or foreign matter in the transmitted-light unit. To resolve this, open and clean the stand K EDU or K LAB and eliminate any foreign matter.
General| Type | Stereo Microscope |
|---|---|
| Magnification Range | 8x - 40x |
| Zoom Ratio | 5:1 |
| Working Distance | 110 mm |
| Illumination | LED |
| Eyepiece | 10x/23 mm |
| Objective | 0.8x |
| Power Supply | 100-240 V |
Provides essential safety guidelines for device operation, handling, and potential hazards.
Provides step-by-step instructions for the physical assembly and setup of the stereo microscope.
Explains the procedure for connecting the stereo microscope to the power supply.
Details the procedure for switching the stereo microscope ON and OFF using the power switch.
Provides detailed steps for adjusting the microscope for optimal viewing and user comfort.
Explains how to set up and adjust the reflected-light illumination systems.
Offers solutions for common faults and issues encountered during microscope operation.
To Next Page