Zeiss Stemi 305 - Wearing Parts; Service

CARE, MAINTENANCE AND SERVICE Stereo microscope
ZEISS Service Stemi 305
38 435063-7044-001 01/2015
5.2.4 Wearing parts
The following wearing parts can be ordered directly from ZEISS:
Description Order No. Remark
Transparent glass plate, d = 84 mm 435425-9310-000
S/W plastic plate, d = 84 mm 435425-9320-000
Eyepiece PL 16x/16 Br foc. 444054-9000-000
Eyepiece cup 444801-0000-000 required 2x
Eyepiece 16x/14 Br foc. 435063-9160-000
Eyepiece W 25x/10 foc. 455046-9901-000
Set of small components
consisting of:
- 2x spiral cables RJ 12
- 1x cable RJ 12, length 1 m
- 2x caps, eyepiece
- 1x cap, microscope body
- 1x Allen key, SW 3
- 1x M6 clamping screw, microscope mount
- 2x M6 clamping screws for C mount
- 2x rubber rings, eyepiece
Protective dust cover, stand K 415500-1800-000
Cover, C-mount Stemi 305 trino
5.3 Service
All interventions in mechanical, optical and electronic internal stereo microscope components may only
be performed by Carl Zeiss Service or by specifically authorized qualified staff.
To ensure your stereo microscope is optimally set and also operates correctly over an extended period of
time, we recommend that you conclude a service/maintenance contract with ZEISS.
For reordering or in case of service, contact your nearest regional ZEISS representative.