95GW13-013_v03
Brewing espresso
Choose a suitable fi lter and place it in the fi lter holder. Hold the fi lter holder and rinse it with water
to pre-heat it.
Pour fi nely ground coffee into the fi lter.
Tamp the coffee. Clean the rim of the fi lter holder to remove any excess
ground coffee.
Place the fi ler holder in the brew head.
Notice: Projections on the holder must fi t in the slots
of the brew head.
Turn the fi lter holder all the way to the right. Place cups under the outlets of the holder. Press the MANUAL button.
The coffee pouring process will resume. Press the
MANUAL button again to stop the coffee pouring
process.
Press the single espresso button.
The coffee pouring process will resume. When the
cup has been fi lled with 60 ml of coffee, the espresso
machine will stop automatically.
Press the double espresso button.
The coffee pouring process will resume. When 2 cups
have been fi lled with 120 ml of coffee each, the
espresso machine will stop automatically.
Take out the coffee holder by turning it to the left and
pulling it down.
Remove the used coffee from the fi lter.
To Next Page
