EasyManua.ls Logo

ZEN Cedar - Additional Water Sanitation & Safety Tips; Section 15: Warranty Information

ZEN Cedar
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Important! Test water to get pH in the 7.2 to 7.6
range (7.4 - 7.5 is ideal.)
3. Ozone system: If your tub has an ozone system, adjust
it according to the specific instructions included with your
heating system. The Ozone is added to the water only
when the water pump is running.
4. Shock the tub water twice per week with two
tablespoons of DiChlor Spa 56 supplied with your tub.
Do NOT USE a different type of chlorine – the supplied
product is formulated for wooden tubs. Other types of
chlorine can do damage.
Other Important Water Sanitation and Safety
Information:
Never heat your tub water above 104 degrees -
higher temperatures can cause health problems.
Always shower before using tub.
Always read the label instructions prior to using a
product and use only as directed.
Never add chemicals when people are in the tub.
Store chemicals in a cool dry location out of
direct sunlight.
We recommend that you change tub water every
4 to 8 weeks.
Section 15: Warranty Information
Your tub has a limited warranty for two years against
defects in material and workmanship. This warranty
excludes damage caused by errors in assembly, normal
wear and tear, and modifications made to the tub.
The cover has a manufacturers’ limited warranty of four
years.
Heating and pump equipment has a limited warranty of
one year.
Zen Bathworks
888-810-7717 info@zenbathworks.com
Parts List: Please note, your tub kit may
items – depending on the options chosen
and style of some items may vary. Use p
parts.
1 ½” “T”
½” “T”
Filter
Shelf Kit
Primer &
Glue
Mirro
15
REV: 2018.01.11

Other manuals for ZEN Cedar